Fanuc 15-M Parameter HELP


Results 1 to 2 of 2

Thread: Fanuc 15-M Parameter HELP

  1. #1
    Member
    Join Date
    May 2013
    Location
    USA
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Fanuc 15-M Parameter HELP

    I have an old Fanuc 15-M controller on a 5 axis chord trimmer .
    My parameter was backed up to the original state but I think there is something missing from the stock back up.
    Can some experts help me out?
    I need to know which parameter and which bit to change to get:
    1/ repetitive canned cycles . it said improper Gcode on G83 and G73.
    2/ to turn on simultaneous 5axis motion. it's not moving simultaneously now,

    Thanks!!!!!

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2009
    Location
    Canada
    Posts
    1379
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc 15-M Parameter HELP

    Send an email to me: cnc@tulipmemory.com



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fanuc 15-M Parameter HELP

Fanuc 15-M Parameter HELP