Need Help! FS310iSA


Results 1 to 3 of 3

Thread: FS310iSA

  1. #1
    Member
    Join Date
    Dec 2006
    Location
    India
    Posts
    253
    Downloads
    0
    Uploads
    0

    Default FS310iSA

    Dear Experts

    HMC was running fine without any issues. It was shut down properly and completely put off from Incomer
    When Machine was put ON after a week, we get error NC alarm Path 1 [SV0401](B)IMPROPER V_READY OFF
    Please let us have check points to ensure drive ready signal of Indexing axis B

    Regards





    -
    -



  2. #2
    Member
    Join Date
    Dec 2005
    Location
    US
    Posts
    443
    Downloads
    0
    Uploads
    0

    Default Re: FS310iSA

    This thread might get you started:
    https://www.cnczone.com/forums/fanuc...ady-alarm.html

    I would look at the lights on your drives and see it anything is in alarm. Make sure all the fans on the drive are running.



  3. #3
    Member
    Join Date
    Dec 2006
    Location
    India
    Posts
    253
    Downloads
    0
    Uploads
    0

    Default Re: FS310iSA

    Thank you for your feedback. Please be safe



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

FS310iSA

FS310iSA

FS310iSA