Need Help! Download / Backup Ladder Fanuc 31i Model B


Results 1 to 3 of 3

Thread: Download / Backup Ladder Fanuc 31i Model B

  1. #1

    Lightbulb Download / Backup Ladder Fanuc 31i Model B

    Hello,

    I´ve been assigned to get back to operation a Robodrill. The machine was in production line for a specific operation, due to this it had some fixtures and sensors to ensure the proper operation was being performed. Beside the VMC is a little control that was used to operate the fixture, it also shows in a display the troubles regarding to start the cycle, the signals are related to X adresses. I read the ladder in the machine and found what I have to modify in order to let the machine free to work.

    My situation is that I don´t known how to backup the ladder to the Memory Card and I can´t edit the ladder in the machine because is password protected. I did SRAM but this doesn´t download the ladder, so could you help to figure this out, please.

    Thank you in advance

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2012
    Location
    USA
    Posts
    31
    Downloads
    0
    Uploads
    0

    Default Re: Download / Backup Ladder Fanuc 31i Model B

    Catalyst,

    One method to backup the ladder is through the Boot System. Section Appendix C in Maintenance Manual.

    The Fanuc Robodrill has a "Custom PMC". Was this additional fixture automation done through this? (If not, it should have!!)

    fReAcKyCnC



  3. #3

    Default Re: Download / Backup Ladder Fanuc 31i Model B

    Thanks Freaky ,

    Nowadays I'm not able to be in factory, let me see next week what I can check. I don´t remember any custom PMC, but I´m not sure right now.



    Quote Originally Posted by freakycnc View Post
    Catalyst,

    One method to backup the ladder is through the Boot System. Section Appendix C in Maintenance Manual.

    The Fanuc Robodrill has a "Custom PMC". Was this additional fixture automation done through this? (If not, it should have!!)

    fReAcKyCnC


    Stay cool and be happy


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Download / Backup Ladder Fanuc 31i Model B

Download / Backup Ladder Fanuc 31i Model B

Download / Backup Ladder Fanuc 31i Model B