Hi all, we have a dah lih mcv 610 with a fanuc 10m control that recently dumped all its parameters, After weeks of trying to source the fanuc 10m books and sourcing parameters list for the machine we finally managed to get hold of some info, We have imputed the parameters back into the machine and got rid of all the alarms although we still seem to be having trouble with the axis's, I can't move any axis with the handle, Jog or rapid. Does any one have any idea why the axis's wont move could it be a parameter that I have missed or something that i haven't done, The machine has the tape player in the back and we do have a tape with the parameters on although the tape will run through but it wont transfer the data over, any help appreciated.

Thanks in advance.

Similar Threads: