Never mind. I have it sorted. I pulled out my hard copy parameters and realized the 15M uses 9000 parameters. My backup is good.
This morning I made a backup of my parameters and noticed the backup file doesn't appear to contain any 900 option parameters. This is the method I used:
CNC Go into EDIT mode.
CNC Press ESTOP.
CNC Press the <, SERVICE, CHAPTER, PARAMETER, >, READ, ALL keys.
What do I need to do to view/punch my 900 option parameters on a 15M? On the 0T I hold down the EOB but not sure on this machine.
Similar Threads:
Last edited by forhire; 02-11-2020 at 11:47 AM.
Never mind. I have it sorted. I pulled out my hard copy parameters and realized the 15M uses 9000 parameters. My backup is good.