Help needed, Kitamura mycenter2 doesn't moves after program stopps.
Hi, First of all sorry about my bad writte english and thanks in advance.
Few days ago... , i'm doing a "large" keyshaft , after machine stopps , i took measure, compensate , and hit the start button to repeat the program. And its here when the hell comes....
The machine was locked in all their axis, no visible alarm yet, I check oil tank, hydraulic tank , switches... all are aparently ok. I took my phone to call the better technician here but.. he is here from the last two days with no solution (he is not preparated , sample of this is that i tell him how to read diagnostics....).
I'm really frustrated about, anyone have a similar problem or known a possible solution?
PD: The machine was a kitamura mycenter 2 with APC and fanuc 0M
@zavateandu There is a little lost of air on table unit allowed on the axis (working table), but i don't know how to move it with the actual status of machine. I bought this machine one year ago, at the moment i don´t use the APC , i work without it.
On the omron plc allowed in APC, there is an error, but i think this errors stay since i bought the machine. i can't secure it really, there are any method to test if it is the problem?