Need Help! Motor alarm light


Results 1 to 13 of 13

Thread: Motor alarm light

  1. #1
    Member steelcutter1960's Avatar
    Join Date
    Nov 2019
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Motor alarm light

    So I have a VMC Super max1 Rebel With Fanuc Series 0-M.
    I turn it on and get Not ready and motor alarm light?
    Has the encoder for motor gone bad?

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Motor alarm light-20191125_111407-jpg  


  2. #2
    Member
    Join Date
    May 2016
    Location
    United States
    Posts
    184
    Downloads
    0
    Uploads
    0

    Default Re: Motor alarm light

    What motor alarm light? What number? Is your E-stop in or out?

    How long since the machine was last run?



  3. #3
    Member steelcutter1960's Avatar
    Join Date
    Nov 2019
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Motor alarm light

    Friday e-stop out checked it twice.



  4. #4
    Member steelcutter1960's Avatar
    Join Date
    Nov 2019
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Motor alarm light

    Light number?

    Attached Thumbnails Attached Thumbnails Motor alarm light-20191125_121321-jpg  


  5. #5
    Member
    Join Date
    May 2016
    Location
    United States
    Posts
    184
    Downloads
    0
    Uploads
    0

    Default Re: Motor alarm light

    What number(s) appear on the servo amp(s)?



  6. #6
    Member
    Join Date
    May 2016
    Location
    United States
    Posts
    184
    Downloads
    0
    Uploads
    0

    Default Re: Motor alarm light

    Also can you get to the alarm or message screen and see if anything is there?



  7. #7
    Member steelcutter1960's Avatar
    Join Date
    Nov 2019
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Motor alarm light

    alarm message

    Attached Thumbnails Attached Thumbnails Motor alarm light-20191125_132201-jpg  


  8. #8
    Member steelcutter1960's Avatar
    Join Date
    Nov 2019
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Motor alarm light

    I'm not to good at this is this helpful?

    - - - Updated - - -

    Or this

    Attached Thumbnails Attached Thumbnails Motor alarm light-20191125_132644-jpg   Motor alarm light-20191125_132650-jpg  


  9. #9
    Member
    Join Date
    May 2016
    Location
    United States
    Posts
    184
    Downloads
    0
    Uploads
    0

    Default Re: Motor alarm light

    The servo tune screen screen (2nd soft button) has some more info including alarms. I'd have to dig deep into the books to find out what they mean, There are normally a few 1's there even when things are normal.

    When normal they should look like this. I have the same servos as you in my Max 3. (Motor ID 8 = Alpha C6)

    The servo tune screen will look like this when normal.

    Alarm 1 00000000
    Alarm 2 00000000
    Alarm 3 10000100
    Alarm 4 00000000

    Did you try pushing the "message" soft key (3rd one) when you had the alarm screen up?

    What about inside the control cabinet? For the 3rd time, do any numbers show up on the servo drives???




  10. #10
    Member steelcutter1960's Avatar
    Join Date
    Nov 2019
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Motor alarm light

    09 flashes for a second then it goes to - -



  11. #11
    Member
    Join Date
    May 2016
    Location
    United States
    Posts
    184
    Downloads
    0
    Uploads
    0

    Default Re: Motor alarm light

    I don't see Alarm 09 being a servo alarm but a spindle alarm having to do with a fan possibly not operating. Or an overheat alarm.

    Do yourself a favor and google Fanuc 65165E and download the Fanuc Control Motor Alpha Series Maintenance Manual. cncspares has the /02 updated copy which is what you want for a machine of your vintage. There is tons in there that will help you along. including the Alarm 09 you're looking at.

    There is little I'm going to be able to help you with without being there and having greater access to what's going on.

    If you want to get this thing up and running quickly, you might just consider calling in a service person.



  12. #12
    Member steelcutter1960's Avatar
    Join Date
    Nov 2019
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Motor alarm light

    Ok thanks for your help, have a good holiday.



  13. #13
    Member tetrateknoloji's Avatar
    Join Date
    Dec 2019
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by the_gentlegiant View Post
    The servo tune screen screen (2nd soft button) has some more info including alarms. I'd have to dig deep into the books to find out what they mean, There are normally a few 1's there even when things are normal.

    When normal they should look like this. I have the same servos as you in my Max 3. (Motor ID 8 = Alpha C6)

    The servo tune screen will look like this when normal.

    Alarm 1 00000000
    Alarm 2 00000000
    Alarm 3 10000100
    Alarm 4 00000000

    Did you try pushing the "message" soft key (3rd one) when you had the alarm screen up?

    What about inside the control cabinet? For the 3rd time, do any numbers show up on the servo drives???
    Merhaba fanuc amplifier üzerinde 2 alarmi var. Fön makinasi ile çalisiyor. Nasil tamir edebilirim. Hangi kompenet arizali.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Motor alarm light

Motor alarm light

Motor alarm light