Need Help! Activate G54-G59 on Fanuc 32i- MODEL B


Results 1 to 5 of 5

Thread: Activate G54-G59 on Fanuc 32i- MODEL B

  1. #1
    Member Simce555's Avatar
    Join Date
    Oct 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Activate G54-G59 on Fanuc 32i- MODEL B

    Hello, I have a problem on the CNC machine, with the controller Fanuc 32i-MODEL B, and the manual says it has a 'Work' page, where is the G54, G55, etc, but when I press Offset, appears only 'Work Shift' softkey. Someone could tell me how to activate this page? Thanks.

    Similar Threads:


  2. #2
    Member
    Join Date
    Mar 2017
    Location
    United States
    Posts
    287
    Downloads
    0
    Uploads
    0

    Default Re: Activate G54-G59 on Fanuc 32i- MODEL B

    Quote Originally Posted by Simce555 View Post
    Hello, I have a problem on the CNC machine, with the controller Fanuc 32i-MODEL B, and the manual says it has a 'Work' page, where is the G54, G55, etc, but when I press Offset, appears only 'Work Shift' softkey. Someone could tell me how to activate this page? Thanks.
    It must be a single spindle lathe, or a swiss since it is a 32. You dont have G54~59.

    It would probably be a Fanuc option that you must purchase.



  3. #3
    Member Simce555's Avatar
    Join Date
    Oct 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Activate G54-G59 on Fanuc 32i- MODEL B

    Thank you for your reply it is a Fanuc option we have to purchase.



  4. #4
    Member
    Join Date
    Mar 2017
    Location
    United States
    Posts
    287
    Downloads
    0
    Uploads
    0

    Default Re: Activate G54-G59 on Fanuc 32i- MODEL B

    Quote Originally Posted by Simce555 View Post
    Thank you for your reply it is a Fanuc option we have to purchase.
    So why do you think you need it? By it not being a included option should clue you into the fact that you are going "off the rez".

    A two axis lathe can do anything you would want from G54 with only workshift and g10. A swiss will likely have pmc and macro features from the MTB that will not work with G54.



  5. #5
    Member
    Join Date
    Dec 2012
    Location
    The Netherlands
    Posts
    325
    Downloads
    0
    Uploads
    0

    Default Re: Activate G54-G59 on Fanuc 32i- MODEL B

    Hi Simce555,

    On my Fanuc-18T with robot and 2-side turning I use f.e. G10 P0 Z503.250 ( Workshift value ) at the start of the program,
    2nd side has a different f.e. G10 P0 Z505.345, this lathe doesn't have the G54-G59 aswell.
    You can try this in MDI-mode, f.e. G10 P0 Z100.
    At your Work-Shift page it has to show a value of Z100.
    Last call from G10 remains active until another G10 (value) is programmed.

    Regards,
    Heavy_Metal.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Activate G54-G59 on Fanuc 32i- MODEL B

Activate G54-G59 on Fanuc 32i- MODEL B

Activate G54-G59 on Fanuc 32i- MODEL B