How to go about getting om-c ladder edited for dnc function


Results 1 to 3 of 3

Thread: How to go about getting om-c ladder edited for dnc function

  1. #1
    Member Chopdr230's Avatar
    Join Date
    Sep 2019
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default How to go about getting om-c ladder edited for dnc function

    Hi i have a miyano tsv-35 and it dose not have tape or dnc modes , no switches on the control . I am able to see the ladder and searched for g127.5 and its not there . Is it possible to have it added ? who or where would do this ? i currently only have 48k memory and can only run small programs . I have found some info on upgrading the memory but if possible id like to be able to drip feed my machine . any info would be greatly appreciated . Thanks

    Similar Threads:


  2. #2
    Member
    Join Date
    May 2016
    Location
    United States
    Posts
    147
    Downloads
    0
    Uploads
    0

    Default Re: How to go about getting om-c ladder edited for dnc function

    I have a YCI Supermax with OMC. M50 and M51 turn DNC on and off. Not sure which is which. I think M51 on. If I find out different tomorrow at work I'll correct this. Can't promise this will work on your machine. You also need software to drip feed to your machine. dnc4u is what I use. Works great.



  3. #3
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Location
    Canada
    Posts
    23224
    Downloads
    0
    Uploads
    0

    Default Re: How to go about getting om-c ladder edited for dnc function

    There is a few older posts on the subject e.g. https://www.cnczone.com/forums/fanuc...m-ladders.html
    You need to find someone, hopefully local that has the Fanuc eeprom burner in order to program and store the modified ladder.
    Al.

    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

How to go about getting om-c ladder edited for dnc function

How to go about getting om-c ladder edited for dnc function

How to go about getting om-c ladder edited for dnc function