G74 requires the Q word. Try setting Q = Z Q0025
or just do a G1 move.
I have a Hawk lathe with a 21i giving me the above error. I cannot figure out what the problem is.
The first block is a straight drill cycle, no peck and it errors
The second is a peck drill cycle (.083) and contains Q parameter, no error
I tried adding Q0000 but that didn't work either.
What should I try? Thanks!!
Code blocks are below
Error
N84 G74 R.005
N85 G74 Z-.025 F.0026
N86 G80
No Error
N98 G74 R.005
N99 G74 Z-2.1002 Q0835 F.0026
N100 G80
Similar Threads:
Thanks
Marc
G74 requires the Q word. Try setting Q = Z Q0025
or just do a G1 move.
Jim Dawson
Sandy, Oregon, USA