- Fanuc 6m + DNC how to ?
-
Member
Fanuc 6m + DNC how to ?
Hi guys,
need help, need to send the a programm to the fanuc 6m.
it setup as parallel port. to the motherboard.
the program is 01313.NC
power light is ON
Ready is ON
it shows 01313.NC
ready T1
try Fanuc in mode programm and also Edit
O-9999 read
but the program does not transfer.
what are we doing wrong parameter are set as default to parameter
any idea ? or parameter to change.
Similar Threads:
-
-
Member
Re: Fanuc 6m + DNC how to ?
Nevermind guys, fix the issue.
issue was a limit switch on the Z axis that was loose. so it was doing it zeros but the connection was bad.
was able to do the transfer all good.
thanks.
- Fanuc 6m + DNC how to ?
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules