Greetings.
I have a problem in my CNC GE Fanuc OM, I tell them the cnc was moved from location and when it was shown all the parameters were deleted
I tried to set parameters 1 by 1 (I don't have a backup)
The Y axis is currently giving me an error and the error is 4n3 (423). If overflow the manual indicates that it is an erroneous parameter or that the power is exceeded, but I have no idea what parameter may be causing it.
The other problem is in the change of tool
When I ask for a T0, the tool is taken from me until there is everything right. If I ask for a T1, take any tool that is in position.
If I ask for any other T2, T3, T4 etc (it has 30 tools), remove the one that has the guard in place and just turn the tool carousel infinitely.
Can someone help me please, this is my first CnC and I can't find the problem