Fanuc 6M Origin Resets with Reset button


Results 1 to 4 of 4

Thread: Fanuc 6M Origin Resets with Reset button

  1. #1
    Activation process legacymachining's Avatar
    Join Date
    Nov 2018
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Fanuc 6M Origin Resets with Reset button

    Hi Everyone, posted in kitamura section but since its generic to fanuc and i have no answers i was hoping to post to a more generalized category.

    anyway, i am used to a Tormach and picked up an 86 mycenter with fanuc 6m. I am having a hell of a time figuring out how to keep my G54 location set. Bascially i figured out that in order to set G5X i need to zero return the machine and tell it how far from zero return the x and y origin is. Great. Ill set it, jog it around a bit and go into some menus to setup a couple things, and out of habit or maybe necessity (maybe i overtravelled) i have to hit reset. When i do this, the absolute position changes to the G54 coordinates. this is incredibly irritating because i cant seem to get it properly setup to run a part. Can anyone help me out here, because maybe i am incorrectly using the control. Another thing i noticed, when i power up the machine it defaults to INC at the bottom, i toggle it to abs but it doesnt seem to affect this problem at all.

    PS man. abs. switch is on.

    To Recap my process:
    1. power up machine, hit abs button, zero return
    2. jog to x origin and write down coordinates
    3. jog to y origin and write down coordinates
    4.type in the coordinates for the G54 position location
    5. jog machine up and out of the way
    6. something requires a reset, may be an overtravel or clearing what i typed into the command
    7. absolute position changes to G54 coordinates that i typed in (essentially shifting the G54 whatever i moved in x,y,z)
    8. start all over while swearing

    HELP?!

    Similar Threads:


  2. #2
    Member
    Join Date
    Dec 2009
    Location
    ROMANIA
    Posts
    947
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc 6M Origin Resets with Reset button

    if you can not disable by hand that man/abs switch,it can be disabled by a data parameter from diagnose.
    do you have the ladder printed?



  3. #3
    Member
    Join Date
    May 2016
    Location
    United Kingdom
    Posts
    526
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc 6M Origin Resets with Reset button

    I thought it was a system parameter for abs/inc start up and also for reverting back to original g53 position



  4. #4
    Activation process legacymachining's Avatar
    Join Date
    Nov 2018
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc 6M Origin Resets with Reset button

    i dont have the ladder printed, i have the maintenance manual and i cannot find any parameters related to abs/man nor can i find any parameter related to reset function. im wondering if its a matter or reset clearing modals?? i really dont know



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fanuc 6M Origin Resets with Reset button

Fanuc 6M Origin Resets with Reset button