Need Help! fanuc main board A20B-8102-0010 oi tf alarm 5


Results 1 to 3 of 3

Thread: fanuc main board A20B-8102-0010 oi tf alarm 5

  1. #1
    Member
    Join Date
    Dec 2015
    Location
    United States
    Posts
    170
    Downloads
    32
    Uploads
    0

    Default fanuc main board A20B-8102-0010 oi tf alarm 5

    hi mates, i have fanuc oi tf with main board A20B-8102-0010 problem 5 alarm blinking.i changed FROM card but stuck on same alarm 5 and also tried give some heat main cpu IC and clean with IP solution but unable to boot the system.is anyone faced this alarm on fanuc oi tf systems.suggest me what should else do to find malfunction area.
    alarm 5 video link https://vimeo.com/user101025869

    Similar Threads:
    Attached Thumbnails Attached Thumbnails fanuc main board A20B-8102-0010 oi tf alarm 5-screenshot_20190720-204544-jpg  


  2. #2
    Member
    Join Date
    Apr 2011
    Location
    USA
    Posts
    841
    Downloads
    0
    Uploads
    0

    Default Re: fanuc main board A20B-8102-0010 oi tf alarm 5

    Your Servo CPU is bad. Problem is I believe on that controller fanuc put the servo CPU on the main board. The way to find out is look where the servo fiber optic plugs in. If it goes to a detachable board then replace that board, if it goes to the motherboard then you will have to replace that.



  3. #3
    Member
    Join Date
    Dec 2015
    Location
    United States
    Posts
    170
    Downloads
    32
    Uploads
    0

    Default

    Quote Originally Posted by drdos View Post
    Your Servo CPU is bad. Problem is I believe on that controller fanuc put the servo CPU on the main board. The way to find out is look where the servo fiber optic plugs in. If it goes to a detachable board then replace that board, if it goes to the motherboard then you will have to replace that.
    drdos,thanks for suggestion,the motherboard have on board optical,so i replaced motherboard and system in running state. but i want to diagnose the section from which area or component is generating this alarm.if i found post soon.

    quick-cnc


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

fanuc main board A20B-8102-0010 oi tf alarm 5

fanuc main board A20B-8102-0010 oi tf alarm 5