Need Help! Fanuc 11 can't execute FIN signal


Results 1 to 2 of 2

Thread: Fanuc 11 can't execute FIN signal

  1. #1
    Member
    Join Date
    May 2008
    Location
    Viet Nam
    Posts
    107
    Downloads
    0
    Uploads
    0

    Default Fanuc 11 can't execute FIN signal

    Dear all.
    My Makino machine( with Fanuc 11M controller) was can not finish the command I entered from MDI such as M9;( EOB was included), even when the DGN 409.2(FIN signal, because this machine used 3M interface) was come to 1. Please guide me how to fix this problem. Thanks a lot.
    Nam.

    Similar Threads:


  2. #2
    Member freakycnc's Avatar
    Join Date
    Apr 2012
    Location
    USA
    Posts
    85
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc 11 can't execute FIN signal

    Is the control trying "In-Position" check? Flashing @ symbol on the bottom of the screen? Is DEN signal on in DGN 1000?
    You didn't mention what model. Horizontal? Vertical?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fanuc 11 can't execute FIN signal

Fanuc 11 can't execute FIN signal