Get machine data - Fanuc 0-T

[flaz83]

Good morning everyone,
my name is Flavio, I'm an Italian guy. I've developed a monitoring production software with my colleague. We use to connect it with new machine, we have a FOCAS connector that gets data from fanuc CNCs, and other protocols. We are now facing a new project: we are connecting old machines, without ethernet, so no FOCAS. We use electrical contacts to get information ,for example green semaphore -> working status, red semaphore -> alarm. We can connect and get data from almost of them, but a couple of machine doesn't have semaphore.
Do you have a better idea to get data from old machines? a guy told me that fanuc has a M4 connector but I can0t understand what it means....
Thanks everyone and sorry my english.
Have a nice day, Flavio

Similar Threads:

• Need Help!- Need Fanuc 16B SRAM and System data from any machine
• Toyoda FA 550 Fanuc 15m PC Data / S RAM DATA required
• Need Help!- Get data from Fanuc to PC
• Fanuc 2T data cable with Fanuc = T compatible?
• Problem- Fanuc O-M data

[memoryman]

I have been personally involved in getting information from older (legacy) Fanuc controls for 10 years.
Send me an PM to discuss it.