Alarm EX1012 IN THE TOOL CHANGE AREA (Fanuc Robodrill ?-T21iFa)


Results 1 to 3 of 3

Thread: Alarm EX1012 IN THE TOOL CHANGE AREA (Fanuc Robodrill ?-T21iFa)

  1. #1
    Member Alamgeer's Avatar
    Join Date
    May 2018
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Alarm EX1012 IN THE TOOL CHANGE AREA (Fanuc Robodrill ?-T21iFa)

    I tried turret restore procedure but get another Alarm OT0500 (Z)+ OVERTRAVEL (SOFT 1) during restore procedure.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Alarm EX1012 IN THE TOOL CHANGE AREA (Fanuc Robodrill ?-T21iFa)-img_7051-jpg   Alarm EX1012 IN THE TOOL CHANGE AREA (Fanuc Robodrill ?-T21iFa)-img_7052-jpg  


  2. #2
    Member
    Join Date
    Dec 2015
    Location
    United States
    Posts
    40
    Downloads
    32
    Uploads
    0

    Default Re: Alarm EX1012 IN THE TOOL CHANGE AREA (Fanuc Robodrill ?-T21iFa)

    confirm the system number first then if you have original parameters of machines find stock limit parameters,after put the values in system parameters.
    also check conditions like door close,gaurd close,z axis interlocking parameters etc.

    quick-cnc


  3. #3
    Member
    Join Date
    Feb 2012
    Location
    united states
    Posts
    117
    Downloads
    0
    Uploads
    0

    Default Re: Alarm EX1012 IN THE TOOL CHANGE AREA (Fanuc Robodrill ?-T21iFa)

    I think you may have reset the turret, but the head is up too high in Z and is in the area normally reserved for tool change. This can happen when interrupt a tool change in progress. I pulled my hair out for a week when it first happened to me. I think there is a procedure outlined in the machine book for a "Manual return" Mine is an older control and may be a little different. Let me know if this helps point you in the right direction.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Alarm EX1012 IN THE TOOL CHANGE AREA (Fanuc Robodrill ?-T21iFa)

Alarm EX1012 IN THE TOOL CHANGE AREA (Fanuc Robodrill ?-T21iFa)