Need Help! Fanuc 11M has no startup


Results 1 to 3 of 3

Thread: Fanuc 11M has no startup

  1. #1
    *Registered User* techbunny2018's Avatar
    Join Date
    Dec 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Fanuc 11M has no startup

    Hi

    We have an old Mori Seiki MV35/40 CNC machine with Fanuc 11M controller used in our Mechanical Engineering department. It has worked great for years and years but last week when I tried to start it the controller was completely dead. No screen action, no panel lights, no sound of interlocks or hydraulics....nothing. I checked all the power supplies and they look good (all voltages read good) and the Master Board shows an "all good" green LED but still nothing. I've unplugged all connectors for cleaning and re-seated them but still no startup? I was wondering if this could be due to a fault in the ESP (emergency stop) or one of the interlocks? I have read that this could also be due to a fault in memory and that I could do a master reset but the parameters would then need to be reprogrammed and these were never recorded while the machine was operational...sigh. Any advice would be greatly appreciated as this machine is our workhorse for the department.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Apr 2006
    Location
    USA
    Posts
    206
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc 11M has no startup

    Whats the part number of the master board



  3. #3
    Registered
    Join Date
    Apr 2009
    Location
    Canada
    Posts
    1109
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc 11M has no startup

    I would look at the display section, since the master board does not give any problem indication.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fanuc 11M has no startup

Fanuc 11M has no startup