Hi
Did you also set the pmc parameters ? ( diagnose from 164 to 226 )
Please help with the following...Got a 2 axis chucker Taiyo Seiki cnc lathe from 1984, with Fanuc 3T C. All parameters gone due the broken and corroded batery case. Replaced them all. New battery case and battery. BAT at CRT went off.
Fortunately got all the original parameters of the machine and loaded them all.
Turned on the machine and have the following conditions:
Red alarm light on at control panel.
Work catcher only move an 1/4 of its total displacement (90°).
Tool turret doesnt move at all.
Chuck closes, but doesn hold the tightening...You hit the foot-switch and it closes, but when you release the foot-switch it releases the force again.
Tail stock also doesnt respond to its M code....anyway, all the hydraulics devices doesnt respond fine.
Oil-level in reservoir and hydraulic pressure are both correct (380 Lbs/in2) as well as the pressure values at chuck and many solenoid valve.
Cant get rid of red alarm light at CP.
Any hint would be highly appreciated.
Thanks again.
Jerry
jerrygroehn@gmail.com
Similar Threads:
- Need Help!- 4140 cut condition
- Problem- Tailstock condition
- Need Help!- cutting condition
- If condition
- Cutting condition.... please !!!!
Hi
Did you also set the pmc parameters ? ( diagnose from 164 to 226 )