Mori Seiki Frontier Lathe Fanuc Model 21-TA

[Normal 77]

Machine was off for a few days and the batteries apparently died. Lost all the parameters and also apparently the LADDER. Have a 9 year old back up of parameters but not the ladder. Wondering if anyone has the same machine we could get a copy of the ladder from.

Thanks.

Similar Threads:

• Mori Seiki L2 Frontier lathe opinions
• Mori Seiki CNC Lathe Model SL-253BMC/500 See Video
• Mori Seiki Frontier M1???
• 1999 MORI SEIKI F-M2 FRONTIER CNC VERTICAL MILL VDEO 50
• Need Help!- mori seiki SL-3A lathe w/fanuc 6

[zavateandu]

you should have an sram backup.that will include all.
ladder is from machine toll builder and need same machine type

[Normal 77]

you should have an sram backup.that will include all.
ladder is from machine toll builder and need same machine type

I think we may have an SRAM back up, found an old F ROM memory card for the machine. Just need to figure out how to access it. Know where to plug it in at the back of the machine, but after that haven't found anything that works.