help...

[loinguyen]

Hello, I have a makino MC86 Fanuc 15MA machine running out of battery so I lost all data. Board PCB3 (main CPU) A16B-1000-0200 all the lights on the PAL light. The data of the pc parameter I have and have been recharged, the board PCB3 (main CPU) A16B-1000-0200 has set again error. The machine is still ready to run 3 x, y, z in JOG mode but on the screen still error; OT007 B + OVERTRAL (HALD) OT008 B- OVERTRAL (HALD). Ask on the forum have brothers know how to fix this help. Thanks!

[memoryman]

Have you entered the PMC data? Is the ladder running?

[loinguyen]

Dear memoryman!
PMC of other machines I know and edit but MAKINO machine I do not see where it is and MAKINO no LADDER display. Have you got a way to view and edit the PMC help me with. Thank you very much!

[memoryman]

You don't have to see or edit the ladder for the PMC parameters to be entered.
I don't know the specific operating procedure for Makino to enter/display data.

[loinguyen]

Dear memmoryman!
Thank you for the reply.