Hello everybody.

I'm trying to run the G76 Threading Cycle in my Turn Fanuc.
System is: Fanuc OI-Mate TB

The G76 command:

G76 P010060 Q100 R0.1
G76 X20.05 Z-9 P975 Q294 F1.5

The machine runs just the FIRST pass and Stop.
The machine does not run the cycle completely.
It's freezes de cycle.

Does anybody know if there is a special parameter [0 ; 0 ; 1 ; 0] to change, if it's blocked?

Similar Threads: