Fanuc i series

[Sythe179]

Just wondering if anybody had a doosan lynx 300m or similar model controller that could give some help with differences in programming.

Like, changing g54 through code with the parameter. Is that possible with parameter lock on, or is that not something i can do on this machine. Eg.

#1221 = X0. Z-45. C0.

And are standard loops still the same. Eg:

N30
G04 x5.
Goto N30

Any other useful tips about this machine would be swell.
Coming from an ace brand fanuc oi-tc control to this is a bit.. Different.

Similar Threads:

• Need Help!- Fanuc series 18 i-M, Daewoo diamond series DMV-500s start up error
• Need Help!- Fanuc Robocut Alpha 0B with Fanuc Series 16-W control 910 SRAM Parity System Error
• Need Help!- GE FANUC α Series Control Motor Servo amplifier unit and Series 16-MB
• Need Help!- Fanuc 0M Series

[generaldisarray]

G10 L2 P1 x? y? z?

G04 X or U whichever works

If GOTO isnt recognized M99 P= linenumber will