Hi Guys,
I'm a software developer working on a system to remotely control a CNC machine.
My target is to use FOCAS2 to interface with the CNC/PMC hardware and, at the moment, I'm able to read a lot of thing from the machine.
My only problem is to be able to stop the working cycle from the remote PC. I first thought to change the working mode from MEM to EDIT to stop the machine but when I issue cnc_wropnlsgnl there are no effects on the machine (also if the return value is OK).

Can someone help me?

Please note: I have no way to change the CNC program (so no IF inside the gcodes with some #nnn var).

Best
Alessio

Similar Threads: