A16B-1000-0030/ 06C Pulse Encoder Pin Out HELP

[jamielmnop]

Pulse Encoder Pin Out HELP please and thank you so much.

please see added picture.

I dont know my pin out on my Pulse Encoder and I don't have a electrical print of the machine for any of the wiring.
is it possible for someone to please give me the pin out on the main board?

My main board is A16B-1000-0030/ 06C
my pulse encoder is A860-0300-T002
I know there is two different models for the encoder......Model 0.1U and Model 1U

I need to know the pins so I can wire in new software and hardware. my hair is almost gone now trying to figure this out.

email me at jamiethisone@yahoo.com

many million of thanks.


Model 0.1U
A - PCA (A+ or MA+)
B - /PCA (A- or MA-)
C - PCB (B+ or MB+)
D - /PCB (B- or MB-)
E - PCZ (+Index Marker is Optional)
F - /PCZ (-Index Marker is Optional)
G - Not Used
H - Not Used
J - Not Used
K - Not Used
L- 5VDC (supply 5+ VDC)
M- (5V common ground)
N - SHIELD
P - OH1 OV
R - OH2
S - Not Used
T- 5VDC (supply 5+ VDC)
U- (5V common ground)

Model 1U
A - PCA (A+ or MA+)
B - PCB (B+ or MB+)
C - Not Used
D - /PCA (A- or MA-)
E - /PCB (B- or MB-)
F - PCZ (+Index Marker is Optional)
G - /PCZ (-Index Marker is Optional)
H - Sheild
J - +5V
K - +5V
N - OV (5V common ground)
P - Not Used
R - OH1
S - OH2

Similar Threads:

• Problem- Encoder pulse rate too low
• Fanuc 6M mainboards..... A16B-1000-0030
• Change the Pulse Encoder
• How to tell if my motor is Pulse encoder or quadrature encoder?

[guhl]

so what connector does your pulse coder have?
this is pinout of connector on PCB

[jamielmnop]

Thank you Guhl, someone emailed me a complete pinout for the board. that worked great. Thank you for your help as well.