Fanuc 0m Program creating not possible


Results 1 to 2 of 2

Thread: Fanuc 0m Program creating not possible

  1. #1
    Registered
    Join Date
    Oct 2010
    Location
    Germany
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Fanuc 0m Program creating not possible

    Hi, i have a Takiswa MAC V1E with Fanuc 0mb and lost Parameters. My problem is i have no documentation.
    I can start it up with some parameters i have found in the internet without errors. But i am not able to enter a program.
    I switch to edit mode but when i hit the program softkey i get no cursor to enter O0001.
    Maybe someone can help me with the parameters.

    Thanks

    Similar Threads:


  2. #2
    Registered
    Join Date
    Apr 2009
    Location
    Canada
    Posts
    1065
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc 0m Program creating not possible

    Your control may need the options reinstalled (900 series parameters).
    Also, if the control uses the built in PMC, the 'diagnostics' (PMC parameters) need to be entered.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fanuc 0m Program creating not possible

Fanuc 0m Program creating not possible