Need Help! simultaneous axis problem


Results 1 to 6 of 6

Thread: simultaneous axis problem

  1. #1
    Registered
    Join Date
    Aug 2007
    Location
    PAKISTAN
    Posts
    140
    Downloads
    0
    Uploads
    0

    Default simultaneous axis problem

    "PS0015 too many simultaneous axes" what is it mean ....??? controller fanuc 31i-model B

    regards

    asif

    Similar Threads:


  2. #2
    Registered
    Join Date
    Oct 2015
    Posts
    207
    Downloads
    0
    Uploads
    0

    Default Re: simultaneous axis problem

    Do you have the line in the G code it fails on? In older fanuc (OM) moving 3 axis simultaneous is an option that had to be bought/enabled in the 900 parameters and the same goes for 4+. An error like this would pop if enabling helical interpolation where it moves 3 axis at the same time if the parameter for 3 axis simultaneous was not enabled. Maybe it's something similar?



  3. #3
    Registered
    Join Date
    Aug 2007
    Location
    PAKISTAN
    Posts
    140
    Downloads
    0
    Uploads
    0

    Default Re: simultaneous axis problem

    Thanks for your advice but ...actually the machine is AWEA FCV-620 series(5 AXES) brand new recently PURCHASED....and that message("PS0015 too many simultaneous axes") come when i insert
    G-code block like this ...
    G0 G90 G54 X0.0 Y0.0 Z120.0 B45.0 C130;

    ANY ADVICE HOW TO ENABLE 5TH AXES TO RUN SIMULTANEOUSLY ALL AXES

    REGARDS

    ASIF



  4. #4
    Registered
    Join Date
    Oct 2015
    Posts
    207
    Downloads
    0
    Uploads
    0

    Default Re: simultaneous axis problem

    Call Fanuc or the MTB if its new. It still sounds trøstes to s parameter thats not on :S



  5. #5
    Registered
    Join Date
    Dec 2009
    Location
    ROMANIA
    Posts
    437
    Downloads
    0
    Uploads
    0

    Default Re: simultaneous axis problem

    fanuc standard is 3 axis simultanious moving
    4 axes machine will move only 3 same time,the 4th is an option and need to buy it and 5 axes ,same time,i believe is not possible,only if you buy full options
    i should run first G0G90G54 X0 Y0 Z0
    NEXT LINE
    B45.0 C130.
    this should work,never put in same line 5 axis positioning same time,will not work.



  6. #6
    Registered
    Join Date
    Aug 2007
    Location
    PAKISTAN
    Posts
    140
    Downloads
    0
    Uploads
    0

    Default Re: simultaneous axis problem

    I pay for 4+1 axes ...not for full 5 axes simultaneously...... because machine builder not offering full 5 axes simultaneously.....



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

simultaneous axis problem

simultaneous axis problem