So my Daewoo Puma 6 just decided to throw this code, svo13, and the machine will not reset and come on. The code is z improver v ready off. I have read a couple other post about this code and I have checked my fuses and they all look like they are ok but I am lost from here. What else do I need to be checking to see what is causing the code? And if pictures of my boards would help just let me know and I will post them.
Thanks
I faced with this alarm couple of times, the problem was in contactor (inside the drive) contacts. you may swap the PCBs with another drive and take a look what happens, but don't forget about settings on PCB (jumpers, switches)
and if you see that swapping PCBs doesn't help, then try to replace contactor
Fanuc 10t code sv013????
Reply with Quote
