Hello everybody.
Following an electric problem I lost all the programming of my controller. I had a recent backup. I put my parameters and my program 9000 in my controller, everything works fine. but when I ask for a tool change, it goes into alarm. I do not have an alarm number. I start the machine and if I order 'M6 T5' (or all other T number). the carousel seems to be set to zero and after the alarm light turns on.
9001(M26 TOOL CHANGE)
M5
M19
G0G91G30Z0
M86T#100 <----- The tool change program is stopped here (M86 = Magazine index)
G28Z0
M99
The value of variable #100 is actually 0.
Thanks all, i speak English, French and Spanish.
Hello systronic. I'm using my Takisawa Mac with Fanuc 0M for several years now after a complete reset of all software.
Can give you my tool change macro code if this helps. Yours, Leo