Fanuc 6M error code 61


Results 1 to 2 of 2

Thread: Fanuc 6M error code 61

  1. #1
    Registered
    Join Date
    Jan 2015
    Posts
    1
    Downloads
    0
    Uploads
    0

    Exclamation Fanuc 6M error code 61

    This answer is perhaps in this forum, but I can not find it!
    Have a machine with Fanuc 6m, which shows the error code 61
    What is this?

    Similar Threads:


  2. #2
    Gold Member fordav11's Avatar
    Join Date
    Aug 2011
    Location
    Fordaville
    Posts
    2517
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc 6M error code 61

    61 isn't listed in my paper 6M manual but its a programming error.

    it is listed in my 6T manual as.....
    061 - Either address P or Q was not commanded in the block which includes a G70, G71, G72 or G73 command.

    if you post your program we should be able to figure out what is wrong



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fanuc 6M error code 61

Fanuc 6M error code 61

Fanuc 6M error code 61