Did you every find parameters for Wasino?
I have same problem
zantraus@yahoo.com
Thanks
Peter
Hello Everyone!
At work we brought in an old Wasino LG-60 lathe that has been sitting in storage for about 10 years. The batteries went dead, and all of the parameters were lost, and no backups were made before it was put into storage. We have backups of our programs and offsets, just not the parameters. Does anyone have a list of the factory Wasino parameters for the Fanuc 3TC controller? If you own one of these machines, screen shots of the parameters pages would be great!
Machine: Wasino LG-60
Serial Number: 687
Date Of Manufacture: April 1986
Controller: Fanuc 3T-C
Thanks in advance guys!
Similar Threads:
- Wasino L5-J3 Fanuc 6T parameters help
- Need Help!- Wasino WMC-3 w/ Fanuc OMC- Need Parameters!!
- Need Help!- wasino LG-7 / Fanuc OT (Need Parameters )
- Need Help!- Wasino Parameters
Did you every find parameters for Wasino?
I have same problem
zantraus@yahoo.com
Thanks
Peter
I have a wasino Lg60 lathe. If you still need the parameters I can send you a copy of
the parameters.
johnd
Hi Johnd,
Could I also get a copy of those params? Mine has also died and I don't have a copy.
Thank you!
-Ben
benkokes@hotmail.com
Ben
Give me about a week and I will send you what I have on my Machine.
Got to find the memory stick or copy to new one. Too many alligators at
the moment.
JohnD
Hi JohnD,
Any luck fending off the alligators?
Thanks for being willing to copy them for me. If you prefer me not pinging you about it, please just let me know.
Thanks again!
Ben
send me a fax number and I will send them to you
John D
PM Sent, Thank you!
Last edited by benkokes; 05-30-2018 at 02:51 PM.
Ben
No problem as long as everyone realizes the parameters might vary from
machines.
John