Anywhere to get ladder for Murata Centrum 2000 eproms?


Results 1 to 5 of 5

Thread: Anywhere to get ladder for Murata Centrum 2000 eproms?

  1. #1
    Registered
    Join Date
    Dec 2013
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Anywhere to get ladder for Murata Centrum 2000 eproms?

    I had to replace the pmc-m board on the Fanuc controller for a Murata Centrum 2000 board. Of course the replacement board had the wrong ladder on the 0f1 and 0f2 eproms. Fanuc says they don't carry these and I would have to go through Murata but I thought I might check here first to see if anyone had this particular ladder. I have a copy of Fapt Ladder 1 so I can burn it even if it was just the files themselves.

    Similar Threads:


  2. #2
    Registered ifixcnc's Avatar
    Join Date
    Jun 2004
    Location
    United States
    Posts
    510
    Downloads
    0
    Uploads
    0

    Default

    What happened to the original Eproms, you should be able to swap them onto the replacement board.



  3. #3
    Registered
    Join Date
    Dec 2013
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default

    Sorry I should have mentioned I tried that but they don't work. The controller just stays on the boot screen. I can wipe the memory and it will boot up but as soon as I put the parameters back in and restart it does the same thing.



  4. #4
    *Registered User* noziz's Avatar
    Join Date
    Aug 2018
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Anywhere to get ladder for Murata Centrum 2000 eproms?

    Hi JedgarG

    Sorry for this inconvenience. I am in a trouble and i need your help.
    I have too a Centrum 2000Q but my machine can't to work as normal because it is lost the parameter of the TDC controller block.
    You can give me that parameter?
    It is very necessarry with me.
    Thanks & regard.



  5. #5
    Registered dh08td's Avatar
    Join Date
    Feb 2015
    Location
    11111
    Posts
    68
    Downloads
    3
    Uploads
    0

    Default Re: Anywhere to get ladder for Murata Centrum 2000 eproms?

    Send eeprom data to my mail: dien08td@gmail.com. i converter for you



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Anywhere to get ladder for Murata Centrum 2000 eproms?

Anywhere to get ladder for Murata Centrum 2000 eproms?