I see many people had experience with old 3T Lathe system from Fanuc so im checking what can i do with my machine to make it more productive - less time for programing and typing and more time for production.
some kind of DNC would be great since i already have camworks and solidworks for haasVF1 mill
First, you need to verify that it actually has a working RS-232 port.
The last 3T I ran into only had a tape reader.
If not, you can either go to Fanuc and see if it is available, or find someone that can install a BTR on the machine.
BTR = Bypass Tape Reader.
Hi
will have some information about roperwerk manufacturers?
I have a CNC roperwerk, but I get alarm system 3, the technician told me it was RAM memory failure, got back to cover, and it has to change, but as it is old, it is difficult to find a replacement
Know someone who sells the motherboard, A16B10000010/08F, and its driver for CNC roperwerk
thank
Hi, does some one have Roperwerk webo turn wt400 difficult to find anyone who has one i need alarm list i m having machine alarm 50.. and i don't have papers on that machines..