Conic thread

[anuevo]

Hi everybody my english is very bad, but I try...
I need to do a conic thread in fanuc OT, can somebody help me with this, if is posible send me a basic program to learn how work the code

Thks Alejandro
from Chile

Similar Threads:

• Need Help!- Thread spec for camera lens filter thread
• Thread Mill Wizard - Slanted thread produced
• acme thread combos and thread mixing
• Thread mill external NPT thread
• Conic sections with G02 & G03?

[sylvain]

G97S1000T0707M3
G0X1.1Z-0.100M8
G1X0.670F0.050
G76P030060 definition(P03=free cut 00=chanfrain 60= angle du filet)
G76Q30 definition(Q30 derniere passe= 0.003)
G76X?Z?P260Q70F? definition(P260=prof. filet sur rayon Q70= premiere passe)
G28U0.0
G0Z7.0
G40T0700
M1

at lingne containing G76X?Z?P260Q70F? , just enter the value you need in the X axis

[PlankTone88]

Remote work can breed disrespect. Because you're paying someone to work at a remote location and you have little or no control over how the work process is going. Of course you need some sort of tool to close that gap...you can use smth like worktime( employee monitoring software) it'll help a great deal but still you can't be sure cause humans...