Need Help! Part Count in Fanuc 21 MB


Results 1 to 2 of 2

Thread: Part Count in Fanuc 21 MB

  1. #1
    Member
    Join Date
    Dec 2006
    Location
    India
    Posts
    310
    Downloads
    0
    Uploads
    0

    Default Part Count in Fanuc 21 MB

    Dear All

    We have got Mitsubishi VMC with Fanuc 21MB

    Part count, which appears at the bottom of Position Screen, is not getting updated

    Please let us know on how to activate this so that at the end of ever Auto cycle, part count will increase by 1

    Best Regards,

    M. Rishikesh


    Similar Threads:


  2. #2
    Gold Member
    Join Date
    Aug 2011
    Location
    Fordaville
    Posts
    2517
    Downloads
    0
    Uploads
    0

    Default

    check parameter 6700 bit 0 (PCM) & 6710

    6700 Bit 0
    M code that counts the total number of machined parts and the number of
    machined parts
    0 : M02, or M30, or an M code specified by parameter No.6710
    1 : Only M code specified by parameter No.6710

    6710
    M code that counts the total number of machined parts and the number of machined
    parts
    [Valid data range] 0 to 255 except 98 and 99
    The total number of machined parts and the number of machined parts are
    counted (+1) when the M code set is executed.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Part Count in Fanuc 21 MB

Part Count in Fanuc 21 MB