- Need Help!- fanuc robodrill
-
Registered
fanuc robodrill
How do i reset a 2005 message (disk spring life over) on a fanuc robodrill
Similar Threads:
-
-
Member
hi
u have to go in the maintenance screen and u will find a lot of maintenance components like spindle ventilator,coolers etc.
u have to reset the counter ,u have the posibility to clear it and it will start to count again from 0
all the messages apear with almost 80 or 120 hours before the lifetime will end so u also can change the time for message to appear.
if u want to send a message on cnc within 5 hours before ends the time u can do it.
but be carefull some of them u have to inspect,check,clean or replace and after that u can reset the counters.
maybe helps
GOOD LUCK!
-
Member
Re: fanuc robodrill
I have Robodrill Alpha T10-B 1995 with the fourth axis nikken Fanuc 16MB
i lost all SRAM data
can any one have SRAM data soft copy
please help me
- Need Help!- fanuc robodrill
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules