Problem with Tool # 4


Results 1 to 2 of 2

Thread: Problem with Tool # 4

  1. #1
    Member Isaac_M's Avatar
    Join Date
    May 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Problem with Tool # 4

    Hello.

    My name is Isaac and I came across this forum while looking for help for an error on a CNC machine, specifically a FAGOR CNC 8055 machine.

    I have only been in the world of CNC programming for a short time and I am learning as I go.

    My problem is that I use a machine with a magazine of 5 tools. Tools 1, 2, 3 and 5 work correctly, but when I try to access tools 4 I get an error message.

    Specifically, I enter T4 and the following message appears:

    CNC: 0146 Word does not exist
    T4

    I would appreciate any help you could give me, and I apologize if I have made the wrong forum.

    Thanks.

    Similar Threads:


  2. #2
    Member
    Join Date
    Mar 2008
    Location
    Argentina
    Posts
    170
    Downloads
    0
    Uploads
    0

    Default Re: Problem with Tool # 4

    You have a tool table if tool number 4 is not set you have problems



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Problem with Tool # 4

Problem with Tool # 4

Problem with Tool # 4