- Problem with Tool # 4
-
Member
Problem with Tool # 4
Hello.
My name is Isaac and I came across this forum while looking for help for an error on a CNC machine, specifically a FAGOR CNC 8055 machine.
I have only been in the world of CNC programming for a short time and I am learning as I go.
My problem is that I use a machine with a magazine of 5 tools. Tools 1, 2, 3 and 5 work correctly, but when I try to access tools 4 I get an error message.
Specifically, I enter T4 and the following message appears:
CNC: 0146 Word does not exist
T4
I would appreciate any help you could give me, and I apologize if I have made the wrong forum.
Thanks.
Similar Threads:
-
-
Member
Re: Problem with Tool # 4
You have a tool table if tool number 4 is not set you have problems
- Problem with Tool # 4
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules