Problem with Tool # 4

[Isaac_M]

Hello.

My name is Isaac and I came across this forum while looking for help for an error on a CNC machine, specifically a FAGOR CNC 8055 machine.

I have only been in the world of CNC programming for a short time and I am learning as I go.

My problem is that I use a machine with a magazine of 5 tools. Tools 1, 2, 3 and 5 work correctly, but when I try to access tools 4 I get an error message.

Specifically, I enter T4 and the following message appears:

CNC: 0146 Word does not exist
T4

I would appreciate any help you could give me, and I apologize if I have made the wrong forum.

Thanks.

Similar Threads:

• Need Help!- Tool Problem
• Need Help!- Tool size problem ;-)
• Need Help!- Fanuc 0-T Tool wear / tool length compensation problem
• Tool # problem

[kcho]

You have a tool table if tool number 4 is not set you have problems