Need Help! Fagor 8055 Control handwheel


Results 1 to 5 of 5

Thread: Fagor 8055 Control handwheel

  1. #1
    Member
    Join Date
    Mar 2005
    Location
    Canada
    Posts
    262
    Downloads
    0
    Uploads
    0

    Default Fagor 8055 Control handwheel

    We just got a new lathe in our shop with the Fagor 8055i control and was wondering if anyone has added a handwheel to there's.
    If anyone can help me out it would really be appreciated.
    Thanks Mike

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2015
    Posts
    165
    Downloads
    0
    Uploads
    0

    Default Re: Fagor 8055 Control handwheel

    Check out Fagor Automation's website, you can download all the OEM manuals for free. Yes you can easily add a hand wheel, there is a dedicated socket for one. The cheap and cheerful Ebays ones will work well. It uses standard A B encoding. Dave



  3. #3
    Member
    Join Date
    Mar 2005
    Location
    Canada
    Posts
    262
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Bdrangdo View Post
    Check out Fagor Automation's website, you can download all the OEM manuals for free. Yes you can easily add a hand wheel, there is a dedicated socket for one. The cheap and cheerful Ebays ones will work well. It uses standard A B encoding. Dave
    Our control doesn't have a dedicated socket, unless it's inside the control. But I will take a look at the site you gave me. Thanks alot for the information.



  4. #4
    Member
    Join Date
    Apr 2015
    Posts
    165
    Downloads
    0
    Uploads
    0

    Default Re: Fagor 8055 Control handwheel

    I was referring to a socket on the axis module, if it is a 8055i it will be marked X5, the earlier 8055 model uses X5 or X6 depending on parameter setting, it is all in the documentation along with the pin connections and parameter settings for the hand wheel. Dave



  5. #5
    Member
    Join Date
    Mar 2005
    Location
    Canada
    Posts
    262
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Bdrangdo View Post
    I was referring to a socket on the axis module, if it is a 8055i it will be marked X5, the earlier 8055 model uses X5 or X6 depending on parameter setting, it is all in the documentation along with the pin connections and parameter settings for the hand wheel. Dave
    Ok great, thanks Dave.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fagor 8055 Control handwheel

Fagor 8055 Control handwheel

Fagor 8055 Control handwheel