- Need Help!- fagor 8055 tc
-
Registered
fagor 8055 tc
I need cabel diagram for FAGOR 8055 with eprom and with 9 pin on the cabinet
it´s will not work with windnc .. and parameter is the control
can´t not find not find anything on the internet .. only windnc.
my connector on cabinet has pin out of 9 pin female connector 5-6-9 loopet pin 1-2-3-8
Similar Threads:
-
-
Registered
Re: fagor 8055 tc
update pin 5-6-9 loop pin 1- 2- 3 -7 on cnc
-
Registered
Re: fagor 8055 tc
The 8055t man is free to download Fagorautomation.com it should have all the RS232 info there. CNCNew could help too. Socal.
-
Registered
fagor 8040
where I can faund mashine parameter for FAGOR 8040TC(or 8055)?
-
8040 and 8055 are the same. Here is the file that you are looking for:
man_8055_inst.pdf
You can find it in the following link of FAMA Technology website.
http://famatechnology.com/cms/wp-con..._8055_inst.pdf
-
Registered
-
Member
Re: fagor 8055 tc
The 8055 eprom model uses a different rs232 connection to the later 8055i. Pin 2 goes to pin 2 and pin 3 goes to pin 3. They are usually reversed. The 8055i has extra parameters but is otherwise identical. It does work well with Wind DNC. Dave
- Need Help!- fagor 8055 tc
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules