NEED HELP! Fadal 6030 giving a updating memory error then restarts.

[tlmkr38]

Run into something today that we haven't seen. Running a program for some parts and about 3/4 through it the machine stops and says Updating memory. The it just shuts down and you have to rehome it and start over. This program in not as large as some we run on it normally and the one for the other half of this part run fine this morning.
Sorry meant to add, this is a 1996 fadal 6030. Been running it a few years now and have never seen this before.

Similar Threads:

• Fadal VMC15XT Unrecoverble memory error at 0742 at start up?
• HELP! X axis positioning error in Fadal 6030
• Problem- Fadal vmc 15 Memory error
• Problem- Fadal Memory Error

[machinehop5]

...have seen a failing memory battery cause strange problems before.

[tlmkr38]

Thanks! I may check that as a precaution Operator texted me later and said he found a place in program that was missing a Z. Fixed that and it was running good so maybe that was all. We will see today Thanks!!!