I have one of these for each of my machines.
USBCNC-FAD-INT - Calmotion
There are a few other options out there but I have used this model for years with no problems.
My company just brought our sister company into our building and they have old 1995 fadel machines. They are currently feeding the code to the machine from cimco(DNC). Does anyone know if it is possible to put an external hard drive that the machine will read the code from? Any help would be appreciated.
Similar Threads:
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I have one of these for each of my machines.
USBCNC-FAD-INT - Calmotion
There are a few other options out there but I have used this model for years with no problems.