Fadal 3016 LED monitor upgrade VGA

[dan60231]

I've read everything I can find on here and everyone seems to have a BNC connector on their Fadal. I have a 2003 with 1990-1C pendant board. It has a VGA output and I've been trying to find a wiring diagram that tells me what the outputs are, or someone that makes an adapter cable to a standard 15pin VGA to fit my LED monitor.

Has anyone successfully connected a LED monitor to the Fadal VGA output?



Similar Threads:

• Vise size for a Fadal 3016
• Need Help!- Electra Supercut 734 WEDM - No Signal to VGA Monitor
• Fadal VMC 3016 I Need Help PLEASE!
• tutor for fadal 3016 w/ 88 control
• Reman Fadal 3016 Questions

[machinehop5]

...VGA to DVI
https://www.ebay.com/sch/i.html?_fro...acat=0&_sop=10

or do you need VGA to HDMI
https://www.ebay.com/sch/i.html?_fro...acat=0&_sop=10

[dan60231]

I've seen all those, and those are standard cables and not made for the Fadal.

the question is has anyone made a newer monitor (VGA-HDMI-AV-BNC) connect and work with the VGA output from a Fadal?

I've found zero info on the VGA pinouts and if anyone has made this work.. I'm not willing to just attach wires and possibly short something out.

[CNCMAN172]

Here are the details on the VGA connector and what each wires function is for that interface.

https://en.wikipedia.org/wiki/VGA_connector

It has been a longtime since I have used a BNC monitor cable, but as I recall that is the same as an old composite signal, which used to be a yellow cable with an RCA plug.

Russ

[dan60231]

I appreciate that link, but I need the pinouts from the Fadal board to make that work.

[CNCMAN172]

Here is a guy to installed a new LCD display for a Fadal.
https://www.cnczone.com/forums/fadal...-93-vmc15.html

[machinehop5]

...for want its worth here is some photos of 2005 Fadal 4020 VGA factory setup

[ballistic42]

Little late to the party. GOTO itscnc.com look for resources, wiring diagrams and look through the choices and you will find the answer. Your machine was prewired with a VGA cable already more than likely. I had to get the VGA board for the bird cage to replace my old board for color monitor and buy the extra VGA board in the pendant. I wired up a lcd monitor screen with VGA for the vmc screen and use the new monitor remote to change I put to USB for the NUC computer in my pendant. Works great! I can get on the net right from the Fadal with no issues and is a wireless. I got the same monitor as Aaron Gouge. The monitor was $110 from alibaba. Well worth the money as the color screen is nice.

If you need any help let me know.

Jeff