Problem Error in tool number


Results 1 to 1 of 1

Thread: Error in tool number

  1. #1
    Member diegoaleman's Avatar
    Join Date
    May 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Error in tool number

    Hi guys!
    I have a big problem; I tell you what it is:
    Have a FADAL machine, Model 914, VMC15RT.
    After a power failure, I loss all parameters.
    I have verified all the electrical connections and the integrity of the machine modules. Everything is OK, except one of them.
    The screen shows: "TOOL 0.974 is in the spindle" (HERRAMIENTA 0.974 ESTA EN EL HUSILLO) instead of “TOOL 1 IS IN THE SPINDLE”.
    in the same way for tool two: "TOOL 1.974 is in the spindle" instead of “TOOL 2 IS IN THE SPINDLE”
    tool three, four, and so on.
    I have already performed a reset of the parameters, but it is still the same
    any suggestion?
    Thanks

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Error in tool number-img_20210503_122238-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Error in tool number

Error in tool number