Need a board

[MANIAK RACING]

Hey guys, I'm looking for a fadal 1570 boars for hooking up renishaw stuff, does anyone here have one for sale or know of anyone that has one?

I'm trying to connect a Renishaw OMI and a TS27R, I also have 2 MI12 boxes, 1 MI8-4, 1 MI-8 and a couple of 120v to 24vdc converters, been trying to figure our how to hook them up but I figured the 1570 board would be less of a headache.

Thanx guys and please let me know ????

Similar Threads:

• G0704 stock spindle control board to mach 3 via C32 board.
• Need Help!- Replacing BMU board in AMADA PEGA 357 (Instaling TULIP Fanram Board)
• Need Help!- Home switch for CNC 3020T- with a Spindle Control Board, JP-382A and JP-1482 Board
• Need Help c2 sieg mini lathe old circuit board to new board conversion

[Recoil6]

I was in the same boat as you are, looked everywhere for one but I could not locate one. Over a year ago I posted in the Fadal Facebook group and guy in England ask me if I was still interested and bought it from him, I got lucky.
If I was you I start installing it with the MI12 and MI8-4 and get it done chances of finding a 1570 are slim.
Check this page https://www.doovsprojects.com/projects/adding-a-renishaw-probe-system-to-my-fadal-vmc that fellow did a wonderful job there is schematics and clear instructions.

[PhilCNC2020]

Hey guys, I'm looking for a fadal 1570 boars for hooking up renishaw stuff, does anyone here have one for sale or know of anyone that has one?

I'm trying to connect a Renishaw OMI and a TS27R, I also have 2 MI12 boxes, 1 MI8-4, 1 MI-8 and a couple of 120v to 24vdc converters, been trying to figure our how to hook them up but I figured the 1570 board would be less of a headache.

Thanx guys and please let me know ????

Hi, you don’t actually need the interface board, all the board is, is a 24v power supply and 2 relays. Watch the Atman video, he explains how you can go about interfacing everything, if you still need help definitely let me know. I installed my Renishaw probing system without it. Excuse the messy wiring in the photo, this is from before I tidied everything up.