Need Help! Fadal VMC 40 Jog not working, CS shows "Reset Emergency Stop"


Results 1 to 2 of 2

Thread: Fadal VMC 40 Jog not working, CS shows "Reset Emergency Stop"

  1. #1
    Member sanjok98's Avatar
    Join Date
    Feb 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Exclamation Fadal VMC 40 Jog not working, CS shows "Reset Emergency Stop"

    Hello! I faced problem I can not find on Internet.

    Fadal VMC40 Model 904-1
    Seller told it is build on 1986. Software says 1993.

    Worked fine before move.
    Now wont ask for belt position on start.
    Asks to jog axes to home position, but Jog screen returns back almost immediately. Jog wheel does nothing.
    Responds with "Reset the emergency stop switch" to CS command.
    Emergency switch is off. No breakers with popped up buttons. Motor breaker with big white "button" also is on.
    I can not reset emergency switch by pressing Jog button, because it works improperly.

    Connected to 220V 3 phase. Pressure connected too.

    Here is the videos:
    https://photos.app.goo.gl/SSX1LrvtYLtAyKNL9
    https://photos.app.goo.gl/vrJeognFxEVLdsec9
    https://photos.app.goo.gl/jG5dSEpL4vbR57GZ8

    Did anyone see something like this?

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Fadal VMC 40 Jog not working, CS shows "Reset Emergency Stop"-20210219_141052-jpg  


  2. #2
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    842
    Downloads
    2
    Uploads
    0

    Default Re: Fadal VMC 40 Jog not working, CS shows "Reset Emergency Stop"

    ...if, the control is asking for Backlash numbers at startup after power loss from the move...you have a dead CMOS Battery mostly likely.

    DJ



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fadal VMC 40 Jog not working, CS shows "Reset Emergency Stop"

Fadal VMC 40 Jog not working, CS shows "Reset Emergency Stop"

Fadal VMC 40 Jog not working, CS shows "Reset Emergency Stop"