XY cutting problem/surface finish


Results 1 to 5 of 5

Thread: XY cutting problem/surface finish

  1. #1
    Member Mhook's Avatar
    Join Date
    Aug 2017
    Location
    1486433
    Posts
    34
    Downloads
    0
    Uploads
    0

    Default XY cutting problem/surface finish

    I got problem on 4020 machine

    This is finishing problem when I make a cut in straight line

    The finish is o.k.

    But when I make the cut with two axis together

    I got wavy finishing
    did somebody had problem like this

    i checked resolver-borads-gibs
    and tune amps!

    Similar Threads:
    Attached Thumbnails Attached Thumbnails XY cutting problem/surface finish-1609580596749791858579972660327-jpg  


  2. #2
    Member
    Join Date
    Dec 2003
    Location
    East Anglia,England
    Posts
    899
    Downloads
    0
    Uploads
    0

    Default Re: XY cutting problem/surface finish

    What cutting parameters were you using?A light hobby machine can't be expected to operate at the sort of speeds and cutting depth that an industrial machine would be comfortable with.



  3. #3
    Member Mhook's Avatar
    Join Date
    Aug 2017
    Location
    1486433
    Posts
    34
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by routalot View Post
    What cutting parameters were you using?A light hobby machine can't be expected to operate at the sort of speeds and cutting depth that an industrial machine would be comfortable with.
    3500rpm
    .1 amount
    feed=850mm/min



  4. #4
    Member
    Join Date
    Dec 2003
    Location
    East Anglia,England
    Posts
    899
    Downloads
    0
    Uploads
    0

    Default Re: XY cutting problem/surface finish

    The material is?



  5. #5
    Member Mhook's Avatar
    Join Date
    Aug 2017
    Location
    1486433
    Posts
    34
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by routalot View Post
    The material is?
    i cleaning boards and reseating all boards
    problems fixed
    cutting is ok and mirror finish obtained



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

XY cutting problem/surface finish

XY cutting problem/surface finish

XY cutting problem/surface finish