Reply with QuoteWhat cutting parameters were you using?A light hobby machine can't be expected to operate at the sort of speeds and cutting depth that an industrial machine would be comfortable with.
XY cutting problem/surface finish
I got problem on 4020 machine
This is finishing problem when I make a cut in straight line
The finish is o.k.
But when I make the cut with two axis together
I got wavy finishing
did somebody had problem like this
i checked resolver-borads-gibs
and tune amps!
Similar Threads:
Re: XY cutting problem/surface finish
What cutting parameters were you using?A light hobby machine can't be expected to operate at the sort of speeds and cutting depth that an industrial machine would be comfortable with.
3500rpmOriginally Posted by routalot
.1 amount
feed=850mm/min
Re: XY cutting problem/surface finish
The material is?
i cleaning boards and reseating all boards
problems fixed
cutting is ok and mirror finish obtained
