How to clamp/Unclamp tools automatically??


Results 1 to 3 of 3

Thread: How to clamp/Unclamp tools automatically??

  1. #1
    RyBowds's Avatar
    Join Date
    Nov 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Question How to clamp/Unclamp tools automatically??

    Hi,
    I am trying to find the codes needed to be able to automatically clamp and unclamp the tool from the spindle with in a cnc programme. This is because we are now using robots to run over night and we want to be able to change the tools half way through the night but to do this we need to be able to release the worn ones and pick up new ones from a fixture. Ive been looking online but yet to find anything. On HAAS machines apparently it is m82 and m86 to do this?

    However we are working with fadal CNC machines.

    Thanks





  2. #2
    Member
    Join Date
    Oct 2008
    Location
    United States
    Posts
    1453
    Downloads
    0
    Uploads
    0

    Default Re: How to clamp/Unclamp tools automatically??

    See if you have a macro installed in memory #O9020. This is the macro that the Fadal tool change calls. There should be details in there how to handle the drawbar solenoid and all the limit sensors. I hadn't looked, but I think I'm going to because that could be very handy.

    Looking in the fadal operations manual, M6 calls macro O9020.
    In that document, it says a M180 activates the tool out button. Try it, let us know if it works!

    See here.....
    https://itscnc.com/images/tech%20doc...0M%20Codes.pdf


    Richard



  3. #3
    Member
    Join Date
    Oct 2008
    Location
    United States
    Posts
    1453
    Downloads
    0
    Uploads
    0

    Default Re: How to clamp/Unclamp tools automatically??

    I tried these early this morning, and they don't work, or at least not from MDI.
    I haven't tried using it in a macro call. I do not see a macro called O9020 either.

    I'm starting to think that document is for a different controller.

    Richard



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

How to clamp/Unclamp tools automatically??

How to clamp/Unclamp tools automatically??

How to clamp/Unclamp tools automatically??